Native Burning

Every year we burn our our Native areas.  Burning native areas is an essential part of their maintenance.  The burn removes undesirables such as "weeds", cool season grasses, and small saplings. 

Root Pruning

In the middle of November we began a week long root pruning program. 

Tree roots compete with grass for nutrients and water.  In most cases, the grass is the eventual loser.  The result is weak or thin turf.  The back of 15 green is an excellent example of this.  The huge oak tree between the green and the road has roots stretching well into the playing surface.  So, this fall we decided to trench between the green and the oak (see the pic below).  We then stapled a root barrier called Biobarrier to the wall of the trench.  The Biobarrier is a geotextile fabric that has herbicides nodules on it.  When the roots come in contact with herbicide they are forced away from the fabric.  The fabric is guaranteed for 15 years. 

While we used the trencher in a few key areas, the vibratory plow was used the most to accomplish the root pruning.  The plow is basically a long blade that is vibrated rapidly as the machine pulls it through the ground.  The tree roots the plow comes in contact with are then severed.  With little surface disruption, compared to trenching, we were able to move quickly throughout the course.   

Areas without the the root barrier will need to be root pruned again within 2 to 4 years.

Reservoir Screen

If you were unaware we have had problems in the recent past with getting fish sucked into the irrigation pumps. After being minced by the pumps the fish puree flows through the irrigation lines and ultimately clogs our sprinkler heads on the course. The end result can be a stuck head that drowns a single location with water or poor water volume which leads to dry areas.

To combat the fish problem we recently lowered the reservoir and installed a new self-cleaning strainer intake. The holes in the screen are 1/8" in diameter. As water flows in any debris that collects is washed off by a series of high pressure nozzles that causes the screen to turn.

We have a Hero on Staff

Paul Kniola is our Equipment Manager here at the club and he recently did a good deed that needs to be recognized.  He will be available for autographs from 7 to 3:30, Monday through Friday. J

Man rescues dog from burning home

By Stan Maddux
For The News-Dispatch

Published: Wednesday, October 19, 2011 5:09 PM CDT

MICHIANA SHORES — Paul Kniola heard his neighbor's dog barking inside the home as the structure was going up in flames Monday afternoon.

So, Kniola kicked in an exterior door, and the black labrador ran through the opening to safety. Even more daring is that Kniola went inside the Michiana Shores residence to see if anyone was inside.

"The dog was locked in there," said Mary Zemansky, who lives across the street from the charred structure at 209 Shady Oak Drive just north of U.S. 12 east of Michigan City.

Zemansky said damage was extensive.

"I don't think it's livable," she said.

According to sheriff's deputies, Zemansky was taking her recyclables outside when she began seeing black smoke. She walked over and discovered the side of the house on fire.

Zemansky said after calling 911, the flames rapidly began engulfing the home near Red Arrow Stables, a popular destination for tourists. Kniola made his way over and with the dog inside barking kicked down the door.

After the dog ran outside, Kniola began yelling and went inside knowing the owner, James Ricketts, is confined to a wheelchair. Finding no one, he safely exited.

Investigators soon discovered Ricketts has been in the hospital for the past week, and his wife had left the residence that morning, police said.

The cause of the fire is still being investigated, police said.

6 Fw Topdressing

During the first week of October we topdressed 6 fairway with sand. This process took place over 3 days. The actual application of sand had taken 1 day, we then solid tined (aerified) to a depth of 4" and then the brushing/dragging of the sand took place over the 2^nd and 3^rd days. All in all, we applied around 200 tons of sands to the entire fairway. This amount of sand has created a 1/2" layer of topdressing in addition to filling the vast majority of aerification holes. 


We will continue this practice 3 to 5 times a year for next number of years. The amount of sand per application will be less in the future, but our goal is to "cap" the fairway with a 3.5" to 4" layer. The end result will be a better playing surface, through better drainage, a smoother surface and better turf.


 

Fairway Drainage

The drainage installation in the fairways was completed last week. The process begins with the sod removal. Trenching then takes place. As the trencher moves dirt comes to the top and is removed by hand to leave an open and clean trench. In the trench a four inch, perforated pipe is installed along with a wire (the wire is used later to locate the pipe if needed). The pipe and wire is then backfilled with a sand/compost mix and compacted. After compaction, the sod is re-laid and later rolled. 


So far, with the recent rains, the areas are drier. The areas that were focused on were: 4, 9, 10 and 17 fairways.











Additional drainage was also installed, to a limited degree, in 7 fw and 15 approach, while 14 approach received extensive work.  The work on 14 included the removal of sod, re-grading, and the installation of drain tile. Afterwards the the sod was re-laid. This area will be ready for play in the spring.

Fall Aerification

Over the past couple of weeks we have been aerifying the fairways. So far 1-3, 7, 8, 11 & 14 are complete. As we were going through this process I began to think about the significance of this practice, so I wanted to share it with you.

Aerification can be accomplished in multiple ways. Some of these include: coring, the use of solid tines and spiking. Core aerification involves a hollow tube made of metal that is used to remove a plug of turf and soil from the ground. This is the process we have been using this week on the fairways. While doing this, thousands of pounds of soil are brought to the surface and lay on top of the turf until we begin to pulverize the cores and drag them back into the turf canopy. The core aerification process accomplishes a number of important cultural practices. Among these is topdressing. As the cores are broken up and they are drug into the turf canopy the playing surface is smoothed and the thatch mat is diluted.

Solid tine aerification is purely a solid shaft of metal that is thrust into the ground. No soil is removed in this process. Like solid tining, slicing does not remove soil. The difference is that slicing is done, primarily, with triangle shaped blades that are mounted on a drum-type machine. As the drum is pulled over the ground, these blades puncture the ground.

Coring, solid tining and slicing all relieve compaction, the most important facet of aerification, to varying degrees. Compaction is one of grass' worst enemies. When compacted ground exists the inability of the roots to penetrate the hard soil is the major detriment. You can see examples of this issue at locations around the course where vehicle traffic occurs regularly.

Even though we are disrupting the playing surface, the long term benefits outweigh the short term surface disruption. So, please excuse our mess. J